Plastic Safety Joints for teddy bears, dolls and soft toys in sizes ranging from 15mm to 55mm (EN71 compliant).
Our plastic safety joints enable your teddy bear, doll or soft toy creation to have moving arms, legs and head. They are available in packs of:
- 1 (1 pins, 1 disk and 1 washer) which would be enough for one single joint (eg one head)
- 5 (5 pins, 5 disks and 10 washers) which would be enough to joint 1 standard toy
- 10 (10 pins, 10 disks and 10 washers) which would be enough to joint 2 standard toys
- 25 (25 pins, 25 disks and 25 washers) which would be enough to joint 5 standard toys
We stock a wide range of sizes and you can choose from disks with the following diameters:-
15mm, 20mm, 30mm, 45mm, 55mm
Each joints is made up of three pieces: one plastic disk with a ridged pin (which sits on one side of the joint) and a plastic washer and locking disk which goes over the pin and holds the joint in place.
Because the joints need to be firmly secured, it is a tight fit to attach the locking disk and you need a bit of strength to push it on! If you are struggling, two things that can help with this are a Safety Eye Insertion Tool or by soaking the joint in hot water for a minute before inserting.
The joints are all washable and conform to British Toy Regulation Safety Standard EN71 Part 3.
PLEASE NOTE: the photograph for this listing might not be showing the size or number of joints that you need but be assured that you will receive the number of disks and size of disks that you order!
If you are unsure how to insert safety eyes or have difficulty inserting safety eyes, we have a video that might help in our ‘How to do it’ section.