20mm Safety Joints for Toy Making


20mm Safety Joints for Toy Making


Packs of 5, 10 or 25 sets of 20mm plastic safety joints for teddy bears, dolls and soft toy making. Conform to EN71.

SKU: JOI-SF-20 Category: Tags: , , , ,

20mm Plastic Safety Joints for Toy Making

Packs of 20mm plastic safety joints to enable your creation have moving arms, legs and head.  Available in packs of 5 (enough to joint a toy that has two arms, two legs and one head!) or in packs of 10s or 25s.

The diameter of the disks is 20mm and the length of the plastic ‘pin’ is approximately 14mm.

These joints are made up of three pieces:  one plastic disk with a ridged pin (which sits on one side of the joint), a washer and a locking disk which goes on to the pin last and holds the joint in place.

Because the joints need to be firmly secured, it is a tight fit to attach the locking disk and you need a bit of strength to push it on!  If you are struggling, two things that can help with this are the Safety Eye Insertion Tool or by soaking the joint in hot water for a minute before inserting.

The joints are all washable and conform to British Toy Regulation Safety Standard EN71 Part 3.

To see how to insert safety joints, please see our ‘How to do it‘ videos.


Additional information

Pack quantity

5 Safety Joints, 10 Safety Joints, 25 Safety Joints, 5 Joints, 25 Joints


There are no reviews yet.

Be the first to review “20mm Safety Joints for Toy Making”

Your email address will not be published. Required fields are marked *